You are here

Rotate an object with arrow

This article applies to RapidManual and RapidLearning.

To rotate an object with arrow, please follow the steps below.

  • Create Remove the threaded fastener (or any other Rotate with Anti–Strobe) action;
     
  • Refresh Procedure;
     
  • Expand the action and click on the Screw’s value;
     
  • Align the axes so that Y axis shows the direction of movement while rotating;
     
  • Click Apply, OK and Refresh Procedure;
     
  • Enable rotation (showRotation: ON);
     
  • Adjust arrow or screw values as required.