MAIN LANDING GEAR TORQUE LINKS REMOVAL

1.

Perform the MAIN LANDING GEAR BRAKE REMOVAL procedure.

   

Ref. 00-PG-32-40-03-00A-401A-A

2.

Remove the screw, clamp and nut from the torque link standoff bracket.

   

Remove the screw and nut

Remove the clamp

3.

Remove the cotter pin, nuts, washers, bolts, standoff bracket and switch bracket from the upper torque link.

   

Remove the cotter pin

Remove the nuts

Remove the washers

Remove the standoff bracket

Remove the bolts

Remove the switch bracket

4.

Remove the nuts, washers, bolts and the switch terminal bracket from the lower torque link.

   

Remove the nuts

Remove the washers

Remove the bolts

Remove the switch terminal bracket

5.

Remove the cotter pin, nut, washer and bolt from the torque links.

   

Remove the cotter pin

Remove the nut

Remove the washer

Remove the bolt

6.

Remove the safety wire from each slotted spring pin.

   

Remove the safety wire

Remove the safety wire

7.

Remove the spring pin and link pin from the upper and lower torque links.

   

Remove the spring pin

Remove the link pin

Remove the spring pin

Detach the link pin

8.

Remove the upper torque link and lower torque link from the strut and axle.

   

Detach the upper torque link

Detach the lower torque link

9.

Inspect the strut, pins and torque link bushings for damage.

   

Inspect the strut

Inspect the pins

Inspect the torque link bushings