Hub Disassembly Procedure | |
| 1. | Remove the Inflation Valve Assembly. |
Remove Cap (TRRVC9) | |
Remove Core (TRC2) | |
Remove Stem (TRJ780-02L) | |
Remove/Discard O-Ring (M23461-4-905) | |
| 2. | Remove the Nuts, Bolts and Washers. |
Remove Nuts (NAS1758L10) | |
Remove Washers (AH091335) | |
Remove Bolts (BAC40US10-32) and Washers (AH091334) | |
| 3. | Separate O/B and I/B Hubs. |
Separate O/B Hub (AHA2349) | |
Separate I/B Hub (AHA2350) | |
Remove/Discard O-Ring Seal (M83461-1-289) | |
| 4. | Remove the parts from the I/B and O/B Hubs. |
Remove Circlip (DAS2349-168) | |
Remove Grease retainer (AHM10353) | |
Remove Bearing (DSR4626-1098) | |
Remove Grease dam (AHM10353) | |
Remove Circlip (DAS2349-172) | |
Remove Grease retainer (AHM10354) | |
Remove Bearing (DSR4628-1099) | |
Remove Grease dam (AHM10352) | |
| 5. | Remove the parts from the O/B Hub. |
Remove Blanking Plugs (AHO91248) | |
Remove Safety Plug (AHO88790) | |
Remove O-ring Seal (NAS1601-112) | |
Remove/Discard O-ring Seal (M83461-4-906) | |
Remove Fillister Screws (MS35276-263) | |
Remove Washers (NAS1149-0363) | |
Remove Blanking Plug (MS9902-05) | |
Remove/Discard O-ring Seal (M83461-4-905) | |